Marine Plywood Estimates
Hull only: $2800 + shipping = $3000
- Edensaw (Devlin recommended)
- Boatbuilder Central
- World Panel Products – similar to Boatbuilder Central, but 5′ x 10′ panels available
- Allied Veneer
Edensaw (Quote 00051172)
OKOUME BS-1088 (The Okoume is 30% lighter in weight)
- 6mm x 4′ x 8′ 5 PLY 425.60
- 12mm x 4′ x 8′ 9 PLY 1,612.80
- 18mm x 4′ x 8′ 13 PLY 1,409.28
HYDROTEK BS 1088
- 6mm x 4′ x 8′ 5 PLY 336.00
- 12mm x 4′ x 8′ 9 PLY 1,075.20
- 18mm x 4′ x 8′ 13 PLY 936.96 x
World Panel Products
Eurolite Plywood: MR E1 Glue
A Poplar-core construction, it is lighter than Okoume, although not as strong, it is ideal for interior-yacht carpentry, and where veneer or laminate bonding requires a smooth surface. This will suit the more weight critical areas.
- 6mm 5 38.80 16lbs
- 9mm 5 44.25 23
- 12mm 7 54.95 32
- 15mm 7 61.00 41
- 18mm 11 71.20 47
Boatbuilder Central
Standard sheets 4×8′ (122 x 244 cm)
|
Thickness |
# of plies |
Weight |
|
4 mm |
3 |
19 lbs |
|
6 mm |
5 |
25 lbs |
|
9 mm |
5 |
37 lbs |
|
12 mm |
7 |
50 lbs |
|
18 mm |
11 |
72 lbs |
Okume Marine BS1088 -
- 4 mm (3/16″) $58.52
- 6 mm (1/4″) $65.36
- 9 mm (3/8″) $79.42
- 12 mm (1/2″) $94.00
- 18mm (3/4″) $130.00
Meranti Marine BS1088.
- 4 mm (3/16″) $32.49
- 6 mm (1/4″) $41.42 x 10 (bottom layer) = $414
- 9 mm (3/8″) $65.15
- 12 mm (1/2″) $79.95 x 20 (sides and bottom) = $1600
- 18mm (3/4″) $99.95
Meranti Marine BS6566
Some voids and wood type variations allowed but still better than marine fir. Good choice for non-structural parts.
- 6mm (1/4″) $33.50
- 9mm (3/8″) $38.72
- 12mm (1/2″) $59.95
- 18mm (3/4″) $67.95 x 12 (bulkheads) = $816
Fiberglass & Epoxy Estimates
Devlin says 70-80 gallons of epoxy. Boat Plans Online kit (below)comes with 27 gallons. Why the large discrepancy?
Epoxy and glass costs (and fillers, misc.):
- Hull: $3000
- Interior and cabin: $3000
MAS Epoxy (through Devlin) $45 Gal = $2650
- Resin: $750/15 GAl Low Viscosity x 2 = $1500
- Hardener: $1150/15 Gal Medium x 1 = $1150
Chesapeake Light Craft – System Three SilverTip
System Three – makers of SilverTip
Fisheries Supply – use Devlin account #327291 “Sam Devlin’s Customers”
Boat Plans Online – kit for 25′ WEST system boat (System Three SilverTip): $3645
- 27 Gallons SilverTip Kit
(18 Gallons Laminating Resin & 9 Gallons No-Blush Hardener) - 4.5 Quart kit of GelMagic adhesive
- 4.5 Quart kit of EZ Fillet
- 1.5 gallon QuickFair fairing paste
- Biaxial tape 6″: 500 yards
- Woven tape 4″: 50 yards
- Biaxial fabric 50″: 85 yards
- Our price includes UPS shipping in the continental US.
