Boatbuilding Blog

January 5, 2009

Working on the Pilothouse

Filed under: Building - Cabin — tomlarkin @ 6:51 am

I’ve spent the last few weekends finishing the pilothouse top and the new sliding door framework. It’s about ready to be primed and painted. At the same time, I added a new Port-side scupper because water pooled a bit when I washed the cabin. I’d hoped it would all run back to the stern scuppers, but it’s about 3/8 of an inch lower at that point.  It looks just like the Starboard scupper, only a few feet further aft.  I also cut openings for vents into the lockers fore and aft.  Other than filling and finish sanding, I’m approaching completion on the outside of the cabin.  I really want to get this finished and start working inside the cabin!

Shiny cabin top with wet epoxy   Top hatch from inside

 Stove cap on base     Heater installed temporarily

I got a Fein Multimaster for Yule, and I’ve been using it heavily, especially for sanding inside corners where nothing else worked well. It’s a great (and expensive) tool – thanks Meryll!

Advertisements

1 Comment »

  1. Bonjour, je suis admiratif de votre travail.vous avez un très joli bateau.Pourriez-vous m’indiquer à titre de renseignement la marque et le type de chauffage que vous avez installé.
    Merci d’avance.YC

    Comment by Yves Chapelain — July 30, 2015 @ 5:05 am


RSS feed for comments on this post. TrackBack URI

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: