Boatbuilding Blog

April 25, 2011

Polishing the Dinghy

Filed under: Dinghy — tomlarkin @ 11:49 am

My dinghy was pretty inexpensive, but it was really rough. Thick glass seams on the chines and big blobs of resin were all over the outside. The bright wood finish also clashed with my color scheme. So I spent the past couple of weekends making it (somewhat) beautiful. First I ground down the worst of the high points and then re-sealed the surface with epoxy. Then I troweled on lots of fairing filler, sanded it off, and did it again. One more epoxy seal, then a couple coats of primer, then three coats of the same two-part polyurethane paint I used on the Coot. I added some rub strips on the bottom to protect my new paint and some ‘Gunnel-Guard’ padding all around the gunwales so the dinghy won’t ding up the hull. I hauled it down to the boat today. I think it looks really nice, and they look like they belong together now.

Lots and lots of filler!
20110424-092935.jpg

Primer:
20110424-093003.jpg

Installing the rub strips. The skeg has a stainless steel strip because it gets a lot of wear:
20110424-093023.jpg

This shows the gunnel-guard installed:
20110424-093034.jpg

At home on the stern:
20110424-093050.jpg

I wrote this entry on the iPad using the WordPress app, so the formatting is a little weird. Not as difficult to do as I expected, though.

Advertisements

4 Comments »

  1. Nice job! The paint looks great. I looked around for your paint reference “the same 2 part polyurethane paint used on the Coot” but could not find. Was that 2 part poly paint, Interlux?

    Comment by Dave — April 25, 2011 @ 6:36 pm

  2. I am getting ready to start a build in two weeks (mid June 2011). It is something that I have always wanted to do. I am documenting my build on my boat classifieds site. I have the intro video up now. I would love some input as the project goes on.

    Video: build a boat

    Comment by Sean — June 1, 2011 @ 5:04 am

  3. Really you done a superior job, I did not read such type of polishing tips just before. The dinghy is looking great.

    Comment by remove scratches — April 17, 2012 @ 12:27 pm


RSS feed for comments on this post. TrackBack URI

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: